![background image](http://html1.mh-extra.com/html/land-pride/pro-series/pro-series_operators-manual_3597730048.webp)
46
Section 5: Maintenance & Lubrication
ZXT54 & ZXT60 Pro Series Zero Turning Radius Mowers Riding Mowers 357-271M
2/10/09
Land Pride
6.
Remove spark plugs and pour a tablespoon of
engine oil into each spark plug hole. Install plugs, but
do not reconnect plug leads.
7.
Crank engine with starter at least a dozen revolutions
to distribute oil over cylinder walls and valve
mechanism.
8.
Clean dirt and chaff from cylinder fins, blower
housing and muffler.
9.
Clean exterior surface of engine. Spread a light film
of oil over any exposed metal surfaces of engine that
are subject to corrosion.
10. Check oil filler cap and fuel tank cap to make certain
they are securely in place.
New Season Preparation
The following service is required before starting the
mower after storing it for a season:
1.
Clean mower, removing trash and dirt accumulation.
2.
Check engine oil level.
3.
Tighten any bolts that have loosened and make sure
all hair pins, cotter pins and clevis pins are in place.
4.
Install all safety shields and review safety
precautions listed in this manual.
5.
Check and inflate tires to correct psi provided in
“Tire Inflation Chart” on page 55.
6.
Fill fuel tank with fresh gasoline.
7.
Reconnect spark plug leads to spark plug.
8.
Run machine at half speed for 5 minutes, checking
operation of the control levers. Stop engine and
check for oil leaks, loose fittings and so forth.
IMPORTANT: Do not use a high pressure washer
on or around the hydraulic pumps and motors. Water
intrusion will result and void the pump and motor
warranty.