Section 4: Maintenance & Lubrication
11/6/18
PR1660, PR1672 & PR1690 Powered Rakes 314-216M
26
Non-Drive Bearing
Grease gauge non-drive bearing every 10 hours
One grease zerk inside skid shoe
Type of Lubrication: Multi-Purpose Grease (Remove Skid
Shoe to grease)
Quantity: Add grease until grease begins to emerge from
either side of the axle.
Drive Chain Case
Fill through top Fill plug and check quantity at lower plug.
Type of Lubrication:
Shell Gadus S2 V220 00 flowable grease
Land Pride #821-045C (32oz. bottle)
Quantity: 2 1/2 pints
(Gear Lube will run out of lower plug when full.)
Gearbox
Check Gearbox oil level every 50 hours
Type of Lubrication: 2.38 pints of SAE 90W gear lube
Quantity: With gearbox level check oil in box by removing
plug from backside. If oil level is low remove top plug and
fill with lube until fluid flows from back port. Do not overfill.
10
Hours
50
Hours
24503
Fill Plug
24504
Inside Skid Shoe
15843
Fill Plug
Level Plug
NOTE:
Use a suction or siphon pump to drain gearbox
of oil when there is not an oil drain plug.
As
Required