background image

Introduction 

Table of Contents

GS1548, GS1560, & GS1572 Grading Scrapers 303-230M

9/25/18

5

Terminology

“Right” or “Left” as used in this manual is determined by 
facing forward in the direction the machine will operate 
while in use unless otherwise stated.

Definitions

Owner Assistance

The dealer should complete the Online Warranty 
Registration at the time of purchase. This information is 
necessary to provide you with quality customer service.

The parts on your Grading have been specially designed 
by Land Pride and should only be replaced with genuine 
Land Pride parts. Contact a Land Pride dealer if 
customer service or repair parts are required. Your Land 
Pride dealer has trained personnel, repair parts, and 
equipment needed to service the implement.

Serial Number

For quick reference and prompt service, record model 
and serial number on the inside cover page and again on 
the warranty page. Always provide model number and 
serial number when ordering parts and in all 
correspondences with your Land Pride dealer. For 
location of your serial number plate, see Figure 1.

Figure 1

IMPORTANT: 

A special point of information related 

to the following topic. Land Pride’s intention is this 
information must be read & noted before continuing. 

NOTE:  

A special point of information that the 

operator should be aware of before continuing. 

25888

Introduction

Land Pride welcomes you to the growing family of new 
product owners. This Grading Scraper has been 
designed with care and built by skilled workers using 
quality materials. Proper assembly, maintenance, and 
safe operating practices will help you get years of 
satisfactory use from this product

Application

The Land Pride GS15 Series Grading Scrapers come in 
48", 60", and 72" working widths and have uses and 
applications in landscaping, farms, ranches, construction 
sites, hunting camps, fishing camps, logging sites, 
mining operations, large estates, small acreages, sod 
farms, and municipal and county rural road maintenance 
facilities. These Grading Scrapers are uniquely designed 
to be extra user friendly and a low cost alternative for 
road grading applications. Unlike a box scraper, they are 
not designed to transfer large volumes of dirt from one 
location to another and as a result do not require the 
additional horsepower that a box scraper normally 
requires. Nor does it require the tending of tractor 3-point 
lift controls to maintain grade that a box scraper might 
require. 

Simply setting a properly adjusted GS15 Series Grading 
Scraper on the ground and driving forward enables the 
operator to grade off high spots and fill in ruts and low 
spots on unimproved roads and lanes with little or no 
manipulation of the tractors 3-point hitch controls. Unlike 
a rear blade, they require no adjustment of blade angling 
or offset positions. The GS15 Series Grading Scraper 
simply and quickly moves dirt or aggregate from high 
spots to low spots. Should a large accumulation of 
unwanted buildup of soil or aggregate occur between the 
blades, initiating a slight raise on the tractors lift controls 
will allow excess material to flow out uniformly and evenly 
under the leveling scraper blades.

See “

Specifications & Capacities

 

on page 16 and 

Features & Benefits

” on page 17 for additional 

information and performance enhancing options.

Using This Manual

This Operator’s Manual is designed to help familiarize 
the operator with safety, assembly, operation, 
adjustments, troubleshooting, and maintenance. Read 
this manual and follow the recommendations to help 
ensure safe and efficient operation.

The information contained within this manual was 
current at the time of printing. Some parts may change 
slightly to assure you of the best performance.

To order a new Operator’s or Parts Manual, contact 
your authorized dealer. Manuals can also be 
downloaded, free-of-charge, from our website at 
www.landpride.com

Summary of Contents for Grading Scrapers GS1548

























Reviews: