![background image](http://html.mh-extra.com/html/land-pride/accu-z-razor-z48/accu-z-razor-z48_operators-manual_672952054.webp)
52
Section 6: Specifications & Capacities
Z48, Z54, ZSR54 & ZSR60 Accu-Z Razor
®
Zero Turn Mowers 357-344M
11/05/10
Table of Contents
Trim Capacity (left side)
2 1/2"
5 1/2"
3"
6"
Overall width
Chute down
62"
67 1/4"
73 3/4"
Overall Length
71 1/2"
78 1/4" with hitch plate
Tire-to-tire width:
43"
48"
Overall Height Top of folded ROPS
Top of unfolded ROPS
52 1/2"
67 1/2"
53 1/2"
68 1/2"
Certified ROPS
Standard
Standard
Drive Tires
4-bolt, 18 x 8.5 - 8 Turf Tread
5-bolt, 20 x 10 -10 Turf Tread
Front Tires
11 x 4 - 5, Ribbed tread with roller bearings 13 x 5 - 6, Ribbed tread with roller bearings
Hour Meter
Standard equipment
Fuel Capacities
12 US GAL
Steering Type
Hydrostatic Twin lever steering provides independent control of each drive wheel.
Twin Lever Steering Controls
Speed, forward, reverse, brake, and turns.
Steering Turning Radius
True zero degree. Turns with counter-rotating independent drive wheels.
Brake Service
Hydrostatic dynamic braking.
Park Brake Type
Manual activated over-center lever to pawl over cog wheel.
Ground Speed
Forward: 0-6.5 MPH
Reverse: 0-4.5 MPH
Forward: 0-7.2 MPH
Reverse: 0-4.5 MPH
Motor Drive
Single V-belt with electric clutch and manual take-up idler pulley.
Wheel Drive
High torque piston type planetary reduction motors
Safety Features
Electric logic-control system governs blade engagement, forward & reverse motion,
engine starting & running, and parking brake functions.
Seat
Deluxe cushion seat with arm rests.
Mainframe Construction
Welded steel
Front Caster Wheels
Free turning with greasable roller bearings.
Front Caster Fork Construction
3/8” steel.
5/16” steel.
Deck Thickness
10 Gauge decks with 11 gauge doubler plate
and 3/16" reinforcement plate connecting spindle housing mounts
Box-Section Reinforced Front Edge
10 ga. thick
Deck Trim Edges
Solid 1” x 3/8” steel bar for reinforced trim edge & doubled plated 10 Gauge front edge.
Deck Housing Depth
5 3/16” deep, (room for high-capacity mowing)
Deck Lift
Foot-operated deck height adjustment with locking pin for setting height.
Hand Operated Controls
Ignition switch, throttle lever, control levers, park brake, blade engagement switch,
choke knob and Fuel Tank Selector Valve.
Indicators
Engine warning light and hour meter for engine run time.
Cup Holder
Two cup holders molded into the left side fuel tank.
Accommodates nearly any cup size.
Cutting Height Adjustments
Height adjustment in 1/4" increments from 1” to 5”.
Mowing Blades
3 Heavy-duty, heat-treated, high-lift steel blades
.25" x 2 1/2" x 16.8"
.25" x 2 1/2" x 18.8"
.25" x 2 1/2” x 20.9”
Blade Tip Speed
18,300 FPM
18,515 FPM
18,700 FPM
Blade Drive
Single B-Section belt drive to all three spindles. Spring loaded take-up idler pulley.
Blade Spindles
Machined ductile iron housing, 1 3/8" diameter high carbon steel shafts
and greasable ball bearings.
Deck Suspension
Four point suspension from frame by mechanical linkage with counter balance springs.
Anti-Scalp Rollers
4 Anti-scalp rollers to improve flotation in rolling and uneven terrain.
General Specifications
Mower Model No
Z48
Z54
ZSR54
ZSR60