LANCOM OAP
-
54
-
1 Wireless – LANCOM OAC
-
54
-
1 Wireless
Chapter 5: Advanced wireless LAN configuration
55
EN
P2P connections are to be identified via their station names, then enter a
unique name for this WLAN station.
For models with multiple WLAN modules, the station name can be
entered separately for each physical WLAN interface.
햴
Close the physical WLAN settings and open the list of
Point- to-point
partners
. For each of the maximum of six P2P connections, enter either
the MAC address of the WLAN card at the remote station or enter the
WLAN station's name (depending on the chosen method of identifica-
tion).
Please observe that only the MAC addresses of the WLAN cards at the
other end of the connections are to be entered here! Not the access
point's own MAC address, and not the MAC addresses from any other
interfaces that may be present in the access points.
