LANCOM GS
-
1224
쮿
Chapter 4: Operation of Web- based Management
61
EN
왏
Count:
Use the drop-down menu to set number of echo requests to send.
Four type of number are possible: 1, 5, 10 and 20.
Default: 1
왏
Time Out (in secs):
Use the drop-down menu to set number of echo requests time out in
second. Four type numbers are possible: 1, 5,10 and 20.
Default: 1
NOTE: You need to press
Apply
to start up after you set the parame-
ters.
쮿
Ping Results:
왏
Target IP address:
Shows the active target IP address.
왏
Status:
Shows the result of the ping status.
쮿
Received replies:
Shows the received replies number of times.
쮿
Request timeouts:
Shows the timeout of request.
쮿
Average Response times (In ms):
Shows the average response time in milliseconds.
4.4
Maintenance
In this section the functions are described for maintaining the switch.
4.4.1
Warm Restart
Warm restart provides the function to restart the device.
After upgrading software, you must restart the switch to have the new
configuration taken in effect.