LANCOM 7100 VPN – LANCOM 9100 VPN
Chapter 5: Connecting two networks
42
EN
5.2
Instructions for LANconfig
Carry out the configuration on both routers, one after the other.
햲
Launch the Wizard 'Connect two local area networks'. Follow the Wizard’s
instructions and enter the necessary data.
햳
The Wizard will inform you when the required information is complete.
You can then close the Wizard with
Finish
.
햴
Once you have completed the set-up of both routers, you can start testing
the network connection. Try to communicate with a computer in the
remote LAN (e. g. with
ping
). The LANCOM Router should automatically
connect to the remote site and make contact to the requested computer.
Ping – the quick test of a TCP/IP con-
nection
To test a TCP/IP connection, simply send a
ping
from your computer to a computer in
the remote network. Details on the ping
command are available from the documen-
tation for your operating system.
IPX connections can be tested by searching
for a remote Novell server. NetBIOS connec-
tions can be tested by searching a computer
in the remote Windows workgroup.
