LANCOM 7100 VPN – LANCOM 9100 VPN
Chapter 3: Basic configuration
27
EN
3.2
Instructions for LANconfig
햲
Start LANconfig with
Start
Programs
LANCOM
LANconfig
.
LANconfig automatically detects new LANCOM devices in the TCP/IP net-
work.
햳
If the search detects an unconfigured device, the Setup Wizard launches
to help you with its basic settings, or indeed to handle the entire process
on your behalf (assuming that the appropriate networking environment
exists).
If the Setup Wizard does not start automatically, you can manually
search for new devices at all interfaces (if the LANCOM VPN Router is
connected via the serial configuration interface) or in the network
(
File
Find devices
).
If you cannot access an unconfigured LANCOM VPN Router, the prob-
lem may be the LAN netmask: In case there are less than 254 potential
hosts available (netmask >'255.255.255.0'), you must ensure that the
IP address 'x.x.x.254' is available in your subnet.
If you choose automatic TCP/IP configuration, you can continue with step
햶
.
햴
Give the LANCOM an address from the applicable IP address range. Con-
firm with
Next
.
햵
In the window that follows, you first set the password to the configura-
tion. Entries are case sensitive and should be at least 6 characters long.
You also define whether the device can be configured from the local net-
work only, or if remote configuration via WAN (i.e.. from a remote net-
work) is to be permitted.
