LANCOM 3550 Wireless
Chapter 5: Setting up the UMTS profile
47
EN
The UMTS/GPRS profile settings are to be found in LANconfig in the configu-
ration area 'Interface' on the 'WAN' tab with the
UMTS/GPRS profile
button.
The name of the network can be read from LANmonitor or, for exam-
ple, by using Telnet under
/Status/External-Interface/Net-
work-List
. A manual network search can be initiated with the
commands
do /Status/External-Interface/Scan-Networks
or
so Setup/Interfaces/UMTS-GPRS-parameters/Scan-
Networks
.
5.3.2
Activate UMTS/GPRS profile
Operating the LANCOM devices with the UMTS/HSPDA function in varying
locations or with different UMTS/GPRS data cards may well require different
sets of settings. The relevant information for operating data cards is collected
in a UMTS/HSPDA/GPRS profile. The profile can be switched very quickly via
the interface settings for the UMTS interface.
The activation of the UMTS interface and the selection of the profile are to be
found in LANconfig in the configuration area 'Interfaces' on the 'WAN' tab
with the
Interface settings
button.
Summary of Contents for 3550 Wireless
Page 1: ...LANCOM 3550 Wireless...
