LANCOM 1811 Wireless DSL – LANCOM 1821+ Wireless ADSL
Chapter 4: Setting up Internet access
43
EN
When using time-based billing, you can set the LANCOM Router to
automatically close existing connections if no data has been trans-
ferred within a specified time (the so-called idle time).
In addition, you can activate a line monitor that identifies inactive
remote stations faster and therefore can close the connection before
the idle time has elapsed.
Active line monitoring can also be used with flat rate billing to con-
tinuously check the function of the remote station.
You also have the option of keeping flat rate connections alive if
required. Dropped connections are then automatically re-established.
Dynamic channel bundling (ISDN only)
if required, the second ISDN B-channel will automatically be bundled
to the connection. This doubles the available bandwidth; it may also
double your connect charges as well, however. What's more, your
ISDN connection will be busy in this case, with all other incoming and
outgoing calls being rejected.
Data compression (ISDN only)
this permits an additional increase in data throughput.
4.1
Instructions for LANconfig
햲
Highlight the LANCOM Router in the selection window. From the menu
bar, select
Tools
Setup Wizard
.
햳
From the menu, select the
Setup Internet access
wizard and click
Next
.
햴
In the following window select your country and your Internet provider if
possible, and enter your access information.
햵
Depending on their availability, the wizard will display additional options
for your Internet connection.