
LANCOM 1811 Wireless DSL – LANCOM 1821+ Wireless ADSL
Chapter 2: Installation
21
EN
LANCOM 1821+
Wireless ADSL
Top panel
The two LEDs on the top panel provide a convenient overview of the most
important status information, especially when the device is installed vertically.
쐃
Power
This LED provides information on the device's operating state. After being
switched on, it blinks green during the self-test. The LED then shines con-
stantly to indicate operational readiness, unless an error is detected as indi-
cated by a code blinked in red.
The power LED blinks alternately in red/green until a configuration
password has been set. Without a configuration password, the confi-
guration data in the LANCOM are unprotected. Normally you would
set a configuration password during the basic configuration (instruc-
VPN
1821+ Wireless ADSL
ADSL S
tatus
ADSL S
tatus
ETH 1ETH 1
ETH 2ETH 2
ETH 3ETH 3
ETH 4ETH 4
ADSL DataADSL Data
쐃
쐇
쐂
쐄 쐆 쐊
쐅 쐈 씈
쐎
Power
Online
Off
Device switched off
Green
Blinking
Self-test after power-up
Green
On (perma-
nently)
Device operational
Red/green
Blinking alter-
nately
Device insecure: Configuration password not set
Red
Blinking
Charge or time limit reached