LANCOM 1811 Wireless DSL – LANCOM 1821+ Wireless ADSL
Chapter 3: Basic configuration
40
EN
You may specify whether the device may only be configured from the local
network or whether remote configuration via the WAN (i.e. a remote net-
work) is also permissible.
Please note that enabling this will also permit remote configuration
via the Internet. You should always make sure that the configuration
access is suitably protected, e.g. with a password.
햶
In the next window, select your DSL provider from the list that is displayed.
Confirm your choice with
Apply
.
If you select 'My provider is not listed here,' you must enter the transfer
protocol used by your DSL provider manually in the next window. Confirm
your choice with
Apply
.
햷
Connect charge protection can limit the cost of DSL connections to a pre-
determined amount if desired. Confirm your choice with
Apply
.
햸
The basic setup wizard reports that all the necessary information has been
provided. You can end the wizard with
Go on
.
3.4
TCP/IP settings to workstation PCs
The correct addressing of all devices within a LAN is extremely important for
TCP/IP networks. In addition, all computers must know the IP addresses of two
central points in the LAN:
Default gateway – receives all packets that are not addressed to compu-
ters within the local network.
Entering the password in the web browser
When you are prompted for a user name and
password by your web browser when accessing
the device in the future, enter your personal
values to the corresponding fields. Please note
that the password is case-sensitive.
If you are using the common configuration
account, enter the corresponding password only.
Leave the user name field blank.
Entering the configuration password