LANCOM 1751 UMTS
Chapter 5: Setting up Internet access
49
EN
5.1
The Internet Connection Wizard
5.1.1
Instructions for LANconfig
Mark your device in the selection window. From the command line, select
Extras
Setup Wizard.
In the selection menu, select the Setup Wizard, Set up Internet connec-
tion and confirm the selection with Next.
In the following windows you select your country, your Internet provider
if possible, and you enter your access data.
Depending on availability the Wizard provides further options for your
Internet connection.
After entering all of the necessary data the Wizard then offers you the
option of setting up a backup connection. Select the corresponding WAN
interface to be used for the backup connection and enter the relevant
access data for the Internet connection.
The Wizard then sets up the alternative Internet access and at the same
time creates the necessary entries into the backup table and also in the
PPP table for checking the Internet connection.
Please be aware that in the case of backup via UMTS, some of the ser-
vices provided over the main Internet connection may not be avai-
lable. Some UMTS service providers either prevent the use of VPN
tunnels or VoIP applications or only allow them after payment of addi-
tional fees. Other providers assign IP addresses from an internal
address range, so preventing applications that rely on public IP
addresses from working. Please ask your UMTS provider for informa-
tion on limitations that may apply.
110584_LC-1751-UMTS-MANUAL-EN.book Page 49 Tuesday, February 26, 2008 5:16 PM
