LANCOM 1722 VoIP – LANCOM 1723 VoIP – LANCOM 1724 VoIP – LANCOM 1823 VoIP
Chapter 2: Installation
47
EN
2.5
Configuring the ISDN and analog interfaces
LANCOM VoIP Router routers feature several interfaces for connection to ISDN
or analog exchange lines, or for connecting ISDN or analog terminal equip-
ment.
A fundamental decision is whether an internal PBX is to be connected and
made VoIP-capable by the LANCOM VoIP Router (e.g. for a single site or for
the networking of branches) or whether the LANCOM VoIP Router is to replace
a local PBX.
If a PBX is to be made VoIP-capable, simply leave the ISDN interfaces with
their standard factory settings. On the underside of the device, check that
all of the DIP switches are in the standard position as shown on the
sticker. Connections of this type do not require an ISDN cross-over
adapter.
If the LANCOM VoIP Router is to replace a PBX, you can use all of the suit-
able ISDN interfaces to connect to the PSTN (public services telephone
network). Set the DIP switches on the underside of the device accordingly
and use one or two ISDN cross-over adapters (LANCOM 1724 VoIP only).
Details of this configuration are available in the PBX Funtions manual.
Detailed information on the significance of DIP swtich settings and
the setup of individual ISDN and analog interfaces are available in the
chapter ’Configuring the ISDN and analog interfaces in detail’
page 121. For other deployment scenarios from those described
above, or for other interface configurations, we stronly recommend
that you refer to the corresponding chapter with sample configura-
tions in the reference manual (on the supplied data medium or in the
Internet).
2.6
Software installation
The following section describes the installation of the Windows-compatible
system software LANconfig and LANmonitor, as supplied.
You may skip this section if you use your LANCOM Router exclusively
with computers running operating systems other than Windows.
2.6.1
Starting Software Setup
Place the data medium (CD/DVD) supplied with your product into your drive.
The setup program will start automatically.
