Lancia Lybra, Owner'S Handbook Manual

Page: 137 / 298

136
ELECTRIC WINDOWS
Front and rear electric windows are
provided with anti-crushing safety de-
vice. When the system control unit de-
tects an obstacle in the last 20 cm of
the window closing travel, it makes
the window travel stop and reverse
immediately.
IMPORTANT Should all the power
windows be operated at the same time
when closing there could be a stroke
inversion of one of them. It is there-
fore suggested to check that closure is
performed.
fig. 151
P4T0263
Should the battery be
disconnected or a dedi-
cated fuse be replaced,
reinitialise the anti-crushing safety
device proceeding as follows:
1) lower completely the driver’s
window keeping the control button
depressed for at least 3 seconds af-
ter it has reached the end of its
travel;
2) release the control button then
close the window completely keep-
ing the button pulled up for at
least 3 seconds after the window
has reached the end of its travel;
3) proceed in the same way for all
the other windows avoiding to per-
form these operations on more
than one window at the same time.
At the end of this procedure the
system is reset to its original oper-
ating conditions, otherwise contact
a Lancia Dealership as soon as
possible.
Front electrical window winders
(fig. 151)
The electrical window winders are
controlled by buttons located on the
door panel on driver’s side. They work
when the ignition key is at
MAR :
A - front left-hand window
B - front right-hand window
C - rear left-hand window
D - rear right-hand window
E - switch to disable rear electrical
window winders.
To prevent system mal-
functioning, do not keep
the control buttons pressed
when the window has reached the
end of its travel.