Lancia Lybra, Owner'S Handbook Manual

Page: 245 / 298

244
To return the seats to their
normal position:
1 ) Move the seat belt sideways and
bring the seat back to an upright po-
sition. Check that it has caught prop-
erly.
2 ) Tip the cushion back and make
sure that the seat belt webbing is not
twisted in the hidden stretches be-
tween the cushions and the seat back.
3 ) Refit the head restraints.
4 ) Refit the passenger compartment
separation net (where fitted), the tilt-
ing oddment tray and the luggage
cover as shown in the specific para-
graphs.
IMPORTANT If there is a fairly
heavy load in the boot and you are
travelling at night, it is a good idea to
check and adjust the height of the
dipped beam headlights (see “Head-
lights”).
To extend the boot
1 ) Pull handle A ( fig. 30 ) located in
the middle of each cushion and pull it
forwards in the direction of the arrow.
2 ) Remove the head restraints from
the rear seat (see "Head restraints")
and insert them in the housings on the
cushion (
fig. 31 ).
3 ) Lift the handle by the sides of the
seat backs to release the seats:
B ( fig. 32 ) = right-hand seat
C ( fig. 33 ) = left-hand seat.
4 ) Lift the seat belts sideways and
tilt the seat back forwards as to ob-
tain a single load platform with the
floor of the boot.
fig. 33
P4T0206
fig. 32
P4T0205
fig. 30
P4T0204
fig. 31
P4T0739