2.7 SHOT SIZE PROGRAMMING
Flavor shot portions can be adjusted using the MVU
touchpad and a graduated cylinder. To adjust flavor
shots:
A. While in Portion Control Programming, press the
Shot
button.
1. Pressing the Shot button again will exit Shot
Size
Programming.
B. Press a “Brand” button. The brand button will
illuminate.
NOTE:
If brand is not enabled for shot mode, the
LED light on that brand will blink twice and turn off.
C. Place a graduated cylinder under the nozzle.
D. Press and hold the XL portion button until the
portion size is achieved. Target is 30 ml (1 0z) of
syrup for an XL portion for most customers.
1. The XLRG LED will blink slowly to indicate that
a new shot duration has been programmed.
NOTE:
The other size buttons are proportioned
automatically based on the amount poured in XL
mode:
Small = 25% of XL portion
Medium = 50% of XL portion
Large = 75% of XL portion
E. Repeat steps B through D for each of the other
brands.
F. Press Pour/Cancel to save the settings.
NOTE:
The Program will save automatically in 60
seconds if no additional changes are made in that
time frame; however, you can exit any time within the
60 seconds window by pressing Pour/Cancel. The
changes you’ve made will be saved.
16
