lancer 815 LX, User Manual

Page: 15 / 50

815 LX / UTILIZATION
CHAPTER 1 BEFORE YOU START 13
4. CLEANING CHEMICALS
THE INFORMATION CONCERNING THE SAFETY
DATA OF THE LANCER WASHING PRODUCTS HAS
BEEN DELIVERED WITH THE MACHINE.
NON-FOAMING DETERGENT
Using the correct non-foaming detergent is required for proper cleaning in this machine.
The non-foaming detergent must be matched to remove the contamination source in
order to ensure satisfactory washing.
IT IS STRICTLY PROHIBITED TO USE SOLVENTS AS DETERGENT.
PLEASE REFER TO SUPPLIERS MATERIAL SAFETY DATA SHEET FOR
SPECIFIC SAFETY AND FORMULATION INFORMATION REGARDING THE
DETERGENT USED IN THIS EQUIPMENT.
THE PROGRAMMED CYCLES ON THIS WASHER HAVE BEEN VALIDATED
WITH LANCER CHEMICALS.
Please do not hesitate to consult LANCER for application specific solutions.
NEUTRALIZING ACID
Using the correct non-foaming neutralizing acid is required for proper cleaning in this
machine. The non-foaming neutralizing acid must be matched to remove the detergent
source in order to ensure satisfactory washing.
THE USE OF NITRIC ACID IS PROHIBITED. ONLY DILUTE PHOSPHORIC,
ACETIC AND CITRIC ACIDS CAN BE USED.
PLEASE REFER TO SUPPLIERS MATERIAL SAFETY DATA SHEET FOR
SPECIFIC SAFETY AND FORMULATION INFORMATION REGARDING THE
ACID USED IN THIS EQUIPMENT.
THE PROGRAMMED CYCLES ON THIS WASHER HAVE BEEN VALIDATED
WITH LANCER CHEMICALS.
Please do not hesitate to consult LANCER for application specific solutions.
SWITCHING TYPE/BRAND OF CLEANING CHEMICALS
Before changing to a different type or brand of cleaning chemical (acid or detergent) it
is necessary to rinse the plumbing circuitry of the machine. Install the new chemical(s)
per the installation instructions and then prime the detergent and acid pumps. Then a
wash cycle can be programmed and run which uses several rinses with water only. This
will prevent any cross contamination of chemicals.