background image

TABLE OF CONTENTS

SPECIFICATIONS ...................................................................................................................................COVER

TABLE OF CONTENTS .....................................................................................................................................1

1. INSTALLATION ...........................................................................................................................................1

1.1

RECEIVING........................................................................................................................................1

1.2

UNPACKING ......................................................................................................................................2

1.3

INSTALLATION ..................................................................................................................................2

1.4

CONNECTING TO ELECTRICAL POWER .......................................................................................2

1.5

CONNECTING SUPPLY LINES TO SOURCES ................................................................................2

2. SCHEDULED MAINTENANCE ...................................................................................................................3

2.1

DAILY .................................................................................................................................................3

2.2

WEEKLY.............................................................................................................................................3

2.3

MONTHLY ..........................................................................................................................................3

2.4

EVERY SIX MONTHS........................................................................................................................3

2.5

YEARLY..............................................................................................................................................3

3. DISPENSER CLEANING AND SANITIZING ..............................................................................................3

3.1

AMBIENT PROCESS.........................................................................................................................3

3.2

VALVES ..............................................................................................................................................4

4. TROUBLESHOOTING.................................................................................................................................4

4.1

WATER LEAKAGE AROUND NOZZLE .............................................................................................4

4.2

LEAKAGE BETWEEN UPPER AND LOWER BODIES.....................................................................4

4.3

MISCELLANEOUS LEAKAGE ...........................................................................................................4

4.4

INSUFFICIENT WATER FLOW..........................................................................................................4

4.5

INSUFFICIENT SYRUP FLOW..........................................................................................................5

4.6

ERRATIC RATIO ................................................................................................................................5

4.7

NO PRODUCT DISPENSED .............................................................................................................5

4.8

WATER ONLY DISPENSED; NO SYRUP; OR SYRUP ONLY DISPENSED, NO WATER...............5

4.9

VALVE WILL NOT SHUT OFF ...........................................................................................................5

4.10 EXCESSIVE FOAMING .....................................................................................................................5

4.11 COMPRESSOR DOES NOT START (NO HUM), BUT CONDENSER FAN 

MOTOR RUNS...................................................................................................................................6

4.12 COMPRESSOR STARTS AND CONTINUES TO RUN UNTIL FREEZE UP

AND WILL NOT CUT OFF .................................................................................................................6

4.13 COMPRESSOR DOES NOT START BUT HUMS .............................................................................6

4.14 COMPRESSOR STARTS BUT DOES NOT SWITCH OFF START WINDING .................................6

4.15 COMPRESSOR STARTS AND RUNS A SHORT TIME BUT SHUTS OFF 

ON OVERLOAD .................................................................................................................................6

4.16 COMPRESSOR AND CONDENSER FAN MOTOR WILL NOT START AFTER 

FIVE (5) MINUTE POWER OFF DELAY (LANCER EIBC 

EXPORT ONLY

) .....................................6

4.17 COMPRESSOR AND CONDENSER FAN MOTOR WILL NOT START AFTER 

FIVE (5) MINUTE POWER OFF DELAY (LANCER EIBC 

USA ONLY

).............................................6

4.18 WARM DRINKS..................................................................................................................................6

5. ILLUSTRATIONS, PARTS LISTINGS, AND WIRING DIAGRAMS ............................................................7

5.1

500 CED WIRING DIAGRAM, 220-240V/50-60HZ, LANCER ELECTRONIC ICE 

BANK CONTROL (INTERNATIONAL ONLY).....................................................................................7

5.2

500 CED WIRING DIAGRAM, 115V/60HZ, LANCER ELECTRONIC ICE BANK 

CONTROL AND CONTROL HOUSING CONNECTIONS (USA ONLY) ............................................8

5.3

CABINET ASSEMBLY...................................................................................................................9-10

5.4

COMPRESSOR DECK ASSEMBLY ...........................................................................................11-12

1. INSTALLATION

1.1

RECEIVING

Each unit is completely tested under operating conditions and thoroughly inspected before 
shipment.  At the time of shipment, the carrier accepts the unit and any claim for damage must be
made with the carrier.  Upon receiving unit(s) from the delivering carrier, carefully inspect carton for
visible indication of damage.  If damage exists, have carrier note same on bill of lading and file a
claim with the carrier.

1

Summary of Contents for 500 Series

















Reviews: