Section 7
Columbia 400 (LC41-550FG)
Description of the Airplane and Systems
Initial Issue of Manual: November 10, 2004
RC050002
Latest Revision Level/Date: A/12-01-2004
7-99
Multilink
1.
Setting up a Multilink Account –
No special action is required, other than setting up a
normal Narrowcast account on www.myavidyne.com. The NOC will automatically detect a
Multilink configuration and will enable features accordingly.
2.
Using Multilink –
Avidyne's Multilink features are available only on installations with both
Narrowcast (Orbcomm) and Broadcast (XM) datalink systems active. Multilink offers the
following features:
a.
Backup
- The Narrowcast system automatically provides weather data if the
Broadcast receiver has failed, if the Broadcast network is unavailable or if you have
cancelled your Broadcast subscription.
b.
Expanded Coverage
- Broadcast datalink only includes data for areas within CONUS
(the lower 48 United States). With Multilink enabled, the Narrowcast system will
automatically provide weather data when your flight plan extends outside of CONUS.
See page 73 for a description of the Narrowcast service area.
c.
Datalink Messaging
- The unique 2-way Narrowcast system provides simple text
messaging between the cockpit and a password-protected page on
www.myavidyne.com. You control access to this page by creating a password which
you give to anyone with whom you want to exchange messages during flight.
d.
Flight Tracking
- Regular automatic aircraft position reporting is built in to the
Narrowcast system. Your login page at www.myavidyne.com provides a list of past
flights, from which you can view a map showing departure and destination airports
and approximate route of flight. In addition, the website password you create will
allow others to view a similar map of a flight in progress.
3.
Enabling Multilink –
If Broadcast datalink has been enabled by your installer, the Datalink
setup page will allow you to configure and enable Multilink. Take these steps to enable
Multilink:
a. Select the Aux page.
b. Press the Datalink button to access the Datalink Messaging screen.
c. On the Datalink Messaging screen, press the Datalink Setup button to configure
Multilink.
d. On the Datalink Configuration screen, check the box to enable Multilink.
e. Press Save to save the new settings.