Quick Installation Guide
Rack type PoE+ switches
PL
| EN
E-mail: [email protected]
www.lanberg.eu
Lanberg © 2015-2021
9
|
14
1)
Important pre
-
recommendations and information regarding rack
type PoE
switch usage
1.1)
Introduction
PLEASE KEEP THIS MANUAL
–
set of recommendations and user manuals for Lanberg
rack
type PoE
switches, detailing the models supported below
:
•
RSFE
-24P-
2C
-360
contains logistics and technical data, instructions,
and regulations that must be adapted and followed
during transport, assembly, use and maintenance of above
-
mentioned products. Do not use the device
before carefully reading and adhering to all the information and safety precautions contained in the user’
s
manual. Keep this manual for later use. All photos, drawings
included
in the manual are for reference only.
NOTE
:
For the most up
-to-
date version of this manual, please visit our website at www.lanberg.eu.
1.2)
Contents of the package
•
Rack
type
PoE
switch,
•
Quick installation guide,
•
Mounting
ears
for installation
in 19”
,
•
Power cord
:
RSFE
-24P-
2C
-360
model
:
AC 100 V ~ 240 V, 50 / 60 Hz, max. 5
A, DC 55
V,
0
.
6
A.
NOTE
: The contents of the packaging, its individual elements and rack type switches may vary depending
on the particular model.
1.3)
General safety precautions
•
The device specifications must be strictly observed when turning the product ON, using it and
connecting the equipment to any external products,
•
The device must not be used to work outside the rated values:
100 ~ 240
V, 50
/
60 Hz
(switch).
The warranty does not cover any damage caused by a deviation from these values when using
the
device,
•
Mains outlet (AC) should be easily accessible and located near the equipment. Remember to connect
the device only to a grounded socket,
•
NEVER
allow a situation where sparks or flames could occur near the device. The aftermath of such
case
could have very negative consequences for people and things in the vicinity,
•
If smoke comes out of the device, disconnect the AC power supply as soon as possible,
•
In the event of a fire, immediately and (without unnecessary delay) disconnect the power supply and
notify the fire department of the situation by dialing their
assigned emergency number, in the country
of your stay,
•
The use of the device does not require specialized training or electrical qualifications. It has a similar
function to the PoE switches,
i
ndicating
of its intended use to power compatible terminal equipment.
The device can be used for IP, CCTV surveillance, access points in hotels, warehouses, companies, etc.,
•
The product is intended for indoor use. Do not rebuild and
/
or modify the products and
/ or
its
components,
•
The manufacturer and distributor are not responsible for any damages resulting from improper use
and improper handling of the product (not in accordance with this manual).
