Quick Installation Guide
Rack type PoE+ switches
PL
| EN
E-mail: [email protected]
www.lanberg.eu
Lanberg © 2015-2021
11
|
14
2.2)
Rack
PoE
switch elements and their
features
/ properties
Lanberg’s
rack
type
PoE
switch contains, on its enclosure, a number of elements. Their number and
meaning may vary depending on your model. Below displayed table contains explanation of each element
or button regardless of the switch model.
Element
Description / features / properties
Power socket
•
RSFE
-24P-
2C
-360
model: AC 100 ~ 240 V, max. 5
A
LAN
ports
Allows you to directly connect up to
24
devices
(including PoE)
and 2 devices (without PoE)
within
local network to the PoE
switch
•
RSFE
-24P-
2C
-360
model:
24
PoE 100 Mb/s ports + 2
Uplink 10
0
0 Mb/s ports
T
oggle switch
I
n „
Normal
”
position
All ports work in standard mode
I
n „
VLAN
”
position
Allows the operation of LAN ports: 1 ~
24
separated
from each other, while allowing each port in the
range to communicate with the other two
I
n „
PoE Extend 250 m
”
position
Allows the operation of LAN ports: 1 ~
24 at a
distance of up to 250 meters with a speed max. up to
10 Mb/s
3)
Turning on the PoE
switch and connecting devices to it
Step 1)
Connect the power by inserting the end of the PoE
switch's power cord
into its power socket
located at the back of the
rack
PoE
switch,
Step 2)
Connect one end of RJ
-
45 crossover (Ethernet) cable to one of the LAN ports located on the rack
PoE switch and its other end to the user’s end device (e.g. PC, PoE camera etc.).
The connection
will be automatically established.
4
3
PoE port
PoE
switch
RJ
-
45
cable
RJ
-
45
cable
PC
Pow
er
cor
d
