EN
FR NL DE SL SV
WBPM-100
EN Instruction manual
11
/ 74
ELECTROMAGNETIC COMPATIBILITY INFORMATION
Guidance and manufacture’s declaration - electromagnetic emissions
WBPM-100 is intended for use in the electromagnetic environment specified below.
The customer or the user of WBPM-100 should assure that it is used in such an environment.
Emissions test
Compliance
Electromagnetic environment - guidance
RF emissions
CISPR 11
Group 1
WBPM-100 uses RF energy only for its internal function.
Therefore, its RF emissions are very low and are not likely to
cause any interference in nearby electronic equipment.
RF emissions
CISPR 11
Class B
WBPM-100 is suitable for use in all establishments other than domestic
and those directly connected to the public low-voltage power supply
network that supplies buildings used for domestic purposes.
Harmonic emissions
IEC 61000-3-2
Not applicable
Voltage fluctuations/
flicker emissions
Not applicable
Guidance and manufacturer’s declaration - electromagnetic immunity
WBPM-100 is intended for use in the electromagnetic environment specified below.
The customer or the user of WBPM-100 should assure that it is used in such an environment.
Immunity test
IEC 60601test level Compliance level
Electromagnetic environment - guidance
Electrostatic discharge (ESD)
IEC 61000-4-2
± 6 kV contact
± 8 kV air
± 6 kV contact
± 8 kV air
Floors should be wood, concrete or ceramic tile. If
floors are covered with synthetic material, the
relative humidity should be at least 30 %.
Power frequency
(50/60 Hz)
Magnetic field
IEC 61000-4-8
3 A/m
3 A/m
Power frequency magnetic fields should be at
levels characteristic of a typical location in a
typical commercial or hospital environment.
Summary of Contents for WBPM-100
Page 69: ...EN FR NL DE SL SV WBPM 100 69 74...
Page 70: ...EN FR NL DE SL SV 70 74 WBPM 100...
Page 73: ......
