8
· E
N
G
LI
SH
EN
Preparing and using
the device
01
Place the device on a stable, flat,
horizontal surface not sensi-
tive to water. Do not hold the de-
vice in your hand during use.
02
Open the water filling inlet cap (3).
03
Optional:
place flowers, tea or 2 or
3 drops of essential oils in the aroma
basket (2). Be sure to dilute the
drops of essential oils with water.
04
Check the water outlet cap (9) is on.
05
Fill the measuring cup (10) with
distilled water (250 ml), then pour the
water into the tank via the filling inlet
(6). You can check the water level any
time using the water level indicator
(8). You may need to refill the device
with water during use. The water level
must NOT exceed the MAX line.
06
Close the water filling inlet cap (3).
07
Plug the power supply into a mains
socket. Select “Hot Steam” using the
slider (7) for 3 to 5 minutes, to dilate
the pores, deeply cleanse and hydrate
the skin. To produce Hot Steam, the
water is preheated for about 90
seconds before the steam is passed
to the outlet (1). 3 Keep your face at
least 25 cm from the steam outlet (1).
08
2 Turn off the device treat black-
heads, acne, dead skin and other
imperfections in your skin using the
accessory kit. Choose one or more
of the accessories listed below to
achieve the facial your skin needs:
• Double-nozzle instrument
with acne needle for pop-
ping spots and finishing loop
• Double-nozzle instrument with
two loops to pop blackheads and
spots of differing diameters
• Multi-purpose double-nozzle in-
strument with triangular loop and a
rounded loop to cleanse blackheads,
dead skin and other imperfections
• Double-nozzle instrument with
a large flat loop to treat imper-
fections and a finishing loop
• Double-nozzle instrument with a
smaller flat loop to treat imper-
fections and a finishing loop
09
You can then apply your moistur-
ising cream, serum or lotion.
10
Select “Cool Mist” using the slider
(7) for 3 to 5 minutes, to close the
pores and reduce signs of ageing.
To switch from “Hot Steam” to “Cool Mist”
and vice versa, always switch back to the "Off"
button between the two steams.
The tools in the accessory kit are made of
hypoallergenic stainless steel. It is important
to clean them with rubbing alcohol before
and after each use.
Caution
Only use distilled water in the device. Do not fill
the water tank with tap water or other liquids.
Caution
Do not close the protective hood (4) while
the device is in use!
Caution
Precipitation or sediment may form during
prolonged usage. Ensure that escaping steam
does not go over other electrical devices, fur-
niture or walls.
After use
01
Turn off the device (slide the switch
(7) to OFF) and unplug it.
02
Allow the device to cool.
03
Empty the aroma basket of
aromatic substances (2).
04
Dry the device with a soft
cloth if necessary.
E-IM-FacialSteamer-Lot001.indd 8
E-IM-FacialSteamer-Lot001.indd 8
18/10/2021 11:11:41
18/10/2021 11:11:41
