14
/ 56 English
EN
FR NL
Programme Applicable areas
Length of
time (min.)
Function
Frequency of
pulses (Hz)
EMS 1
30
Normal
50
EMS 2
30
Normal
20
EMS 3
20
Cyclical
30-80
EMS 4
25
Cyclical
30-60
EMS 5
25
Cyclical
30-45
Details of the cycles
Program number
Preparation term
Working term
Stop term
Phase 1
Phase 2
Phase 3
Phase 4
EMS 3
30Hz/250uS
45Hz/250uS
80Hz/250uS
30Hz/250uS
EMS 4
30Hz/250uS
45Hz/250uS
60Hz/250uS
30Hz/250uS
EMS 5
30Hz/250uS
45Hz/250uS
45Hz/250uS
30Hz/250uS
Output amplitude increases for approximately 2s, is maintained for approximately
5s, decreases for approximately 2s then stays at 0 for around 10s.
MAINTENANCE
Cleaning the device
Before cleaning, remove the batteries from
the device.
After each use, clean the device with a soft, slight-
ly damp cloth. If it is very dirty, you can use a cloth
moistened with a gentle, soapy detergent.
Make sure that the water does not seep into the
device. If this happens, do not use the device
again until it is completely dry.
To clean it, do not use any chemical cleaning
agent or abrasive product.
Cleaning self-adhesive
electrodes
So that electrodes keep their stickiness for as long
as possible, clean them carefully with a damp, lint-
free cloth.
Replace the protective film on the electrodes.
E-IM-MediStim-001.indd 14
19/12/2017 14:45:35
