7
· E
N
G
LI
SH
EN
Description
The device 1
01
Four massage heads
02
Fastening straps
03
Manual control
04
Seat cushion
05
Power cable
06
Hanger strap
Remote control 2
01
POWER: on/off button and initial re-
set of the massage mechanism
02
PAUSE: stops the device immediately
03
BODY SCAN: button to
activate the body scan
04
SHIATSU: button to select the
shiatsu massage mode
05
ROLLING: button to select the
rolling massage mode
06
SPOT: button to select a precise
massage area (spot massage)
07
UP and DOWN ARROWS: buttons to
adjust the height (spot massage)
08
FULL BACK: whole back
and neck massage
09
UPPER BACK: massage for
the upper back area
10
LOWER BACK: massage for
the lower back area
11
TIMER: button to select 10 or 15 minutes
12
HEAT: button to turn the
heating function on/off
Preparation
before use
01
Place the cushion upright on a suita-
ble chair with a seat and backrest. En-
sure the seat section is placed so that it
is in full contact with the seat of the chair
and at an adequate height for the back.
02
Use the straps to secure the
Bodysan Massager.
03
Plug the device into the mains.
Instructions
01
Press your back vertically onto the mas-
sage device. You will need to sit up
straight to ensure accurate palpation of
the back. This is made possible by the
body scan function, which measures the
user's size. At the start, press the mas-
sage device carefully against the back.
Ensure that you are sitting comfortably
on the seat, with your back straight. En-
sure you position yourself in the middle
so that the massage heads move prop-
erly to the left and right of your spine.
Check carefully that the massage po-
sition feels nice to you and then move
your weight gradually towards the mas-
sage device. The massage should feel
pleasant and relaxing at all times. If the
massage is painful or unpleasant, stop
it or change the position of the device
02
Press the POWER button to turn on the
massage device. The LED display on the
BODYSCAN button flashes throughout
the back palpation. After the palpation,
the shiatsu massage programme
is activated. The LEDs indicate the
massage function currently being used.
03
Choose your massage mode:
• SHIATSU: A combination of shi-
atsu and rolling massage ap-
plied to the back and neck
• ROLLING: A rolling massage ap-
plied to the back and neck.
04
Choose the massage area:
• FULL BACK: the whole back and neck
• UPPER BACK: the upper back
• LOWER BACK: the lower back
• SPOT: using the "up" and "down" ar-
rows, select a specific place on
the back for the massage.
05
Turn the heat function on or
off by pressing HEAT.
E-IM-BodyscanMassager-Lot001.indd 7
E-IM-BodyscanMassager-Lot001.indd 7
30/08/2022 10:53:36
30/08/2022 10:53:36
