Lamtec KS1D, User Manual

Page: 7 / 58

6
2 General Safety Instructions
2.2 Proper Use - Conditions of Use
Operation
The LT3 Lambda Transmitter is an all-purpose O
2
measuring device based on microprocessor
for direct measurement of the O
2
concentration under super-stoichiometric range (λ > 1) used
together with Lambda Probe LS2
Operation
The Lambda Transmitter is an electronic data interpreting device which is used in conjunction
with the Lambda Probe LS2for the continuous measurement of the O
2
concentration in non-
combustible gases in the superstoichiometric area.
Prerequisites
It is assumed that plant planning, mounting, installation, commissioning, maintenance, and
service work will be carried out by sufficiently trained personnel and that this work will be
checked by responsible skilled personnel. It must be particularly noted that
•
the operation complies with the technical data and specifications regarding permissible
use, mounting, connection, and environment and operating conditions (refer to the con-
tract documents, the device user information, rating plates, etc.).
• work will be carried out in accordance with the local, plant-specific circumstances and with
regard to the operational risks and directives.
• all the measures required to preserve the value, e.g. for transportation and storage as well
as maintenance and service, are maintained.
Intended use
The product described here has left the factory in a flawless, safe and checked condition and
it must be maintained exclusively in the manner that is described by the manufacturer. Equally,
the proper transportation, correct storage and setup as well as the careful operation and main-
tenance, are critical for the flawless and safe operation of the device. Sufficiently qualified per-
sonnel must be used to install and operate this product. They must be familiar with the security
advice and warnings specified here and ensure they can be implemented flawlessly. Unqual-
ified persons working on the device or the warning information provided here or on the device
not being observed could result in serious personal injury and / or damage to property. The
device is being used as intended if the device is being used solely for the application specified
in the technical description. Auxiliary devices or those from other manufacturers must be rec-
ommended or authorised by LAMTEC. Provided the safety information and operating direc-
tives specified in this manual are observed, this device should not present any risks in terms
of damage to property or the health of personnel.