2
POWER SUPPLY - MAINS
The projector comes with a 2m cable. It’s necessary to mounting a suitable plug and correctly earthed.
BROWN = LINE BLUE = NEUTRAL YELLOW / GREEN = EARTH
FILTER FRAME
The filter frame (5) is located to the front of the projector. Slide the filter frame out. Insert the coloured
gel, replace when the gel is inserted.
It is recommended that only filters with a high temperature capacity are used.
MAINTENANCE
If the protective grill or any of the lenses become damaged or broken they should be replaced. If the
lamp becomes damaged or deformed in any way it must be replaced. To ensure the reliability of the
projector it should be kept clean. It is recommended that the lenses should be regularly cleaned (six
months) to maintain an optimum light output. Do NOT use any type of solvent on filters and lenses.
MODULAR SYSTEM ASSEMBLY
It is possible to have a multiple light source by connecting two or tree projectors together. You could
have the accessory to connect the projectors, on request.
One accessory
TE134
for two projectors and two accessories
TE134
for tree projectors.
TE134
is made by two clamps with 8 fixing screws.
Unscrew the knob (2) and fix the bracket of one floodlight on
the other side.
Fix the first clamp with the 4 screws where are two
floodlights meet. Do the some thing whit the second clamp
on the bottom part of the floodlights.
Unscrew the knob (2) and fix the bracket of
one floodlight on the other side. Take away
the bracket on another floodlight.
Fix the first two clamps with the screws
where the floodlights meet. Do the some
thing whit the other 2 clamps on the bottom
part of the floodlights.
