1
This instruction manual contains important information about the installation and use of the
projector. Please read and follow these instruction carefully.
Always ensure that the power to the projector is disconnected before opening the projector or
commencing any maintenance work.
The specifications can be changed in the course of product improvement.
SAFE USAGE OF THE PROJECTOR
•
Do not attempt to dismantle and modify the projector.
•
Do not allow contact with water or any other fluids, or metallic objects (IP20).
•
Do not install the projector in areas of high humidity.
•
The projector is not designed or intended to be mounted directly on to inflammable
surfaces.
•
Keep at least 0.5m distance between the projector and adjacent inflammable surfaces.
•
Keep at least 3m between the lamp and the illuminated surfaces.
•
The projector must only be used complete with its protective grill and/or front lens.
•
Avoid direct exposure to the light from the lamp. The light is harmful to the eye.
•
Note: the lamp reaches very high temperatures, allow at least 15 minutes for the lamp to cool
completely before attempting to handle it. Ensure the lamp is cool before attempting to handle it
INSTALLING THE PROJECTOR
The projector should be mounted through the 10mm hole in its bracket (1). For safety the projector
should have a secondary fixing with a safety chain through the fixing eye (3). The projector bracket
allows an angle adjustment of +90° / -90° and, once positioned, the knob (2) should be firmly tightened.
The projector mounting bracket can also be easily rotated to be positioned on the underside of the
projector for tripod mounting.
FITTING THE LAMP
The lamp access hatch is released by turning the screw (4). Open the protective grill and insert the lamp
into the sockets. use only the lamp version that is correct for the mains voltage. Insert the lamp with care
and without using excessive force, use a cloth to hold the lamp and do not touch the glass of the lamp
directly with your hands.
Replace the protective grill and close the access hatch
Linear halogen lamp 1000W R7s (185.7mm) horizontal
LP15
