7
User’s interface
Use inside display interface to modify setting of the projector: change DMX
starting address, enable stand alone function.
Use the buttons + and
-
to surf the menu’s function.
To enter into the menu, you have to push the Mode button and after that you
can search for the desiderate function and push the Enter to enter in it.
Push the Enter button to directly change DMX starting address.
In the address view mode, for example A.001, if the point after the letter A is blinking the board is receiving DMX signal, if
the point is static there’s no DMX signal.
Functions menu
-
A.001
:
(dmx address) DMX starting address (first channel).
Default value
001
Go into pushing Enter , choose the value with + and - and push Enter to confirm.
-
DM.PA
:
(dmx patch) Patch of the board, from 1 to 14 dmx channel.
Default value
7C d
Go to this submenu pushing Mode , choose
DM.PA
with + and - and push Enter to enter in. Use + and - to select the
desiderate patch and push Enter to confirm
On the table below you can see the summary of the channels, go to page 9 to see the detailed functions.
DMX
7C d
1C
3C
3C d
4C
4C d
13C d
1
Green Dimmer Green Green Green Green Green
2
Red Red Red Red Red
Green
fine
3
Blue Blue Blue Blue Blue Red
4
Amber
Dimmer
Amber
Amber
Red
fine
5
Strobe
sync
Dimmer
Blue
6
Strobe
Blue
fine
7
Strobe
delay
Amber
8
Dimmer
Amber
fine
9
Strobe
10
Dimmer
11
CTC white
12
Fade speed
13
Frequency
14
Frequency
fine
-
DM.DE
:
(dmx delay). When DMX signal is missing, the board keeps the last DMX value received for a set period
according to this functions. After the programmed seconds, the board will execute the function according to
DM.ST
function,
so you can have: black-out, leds on at 15% or led on at 100%.
Default value
003
seconds
Go to this submenu pushing Mode , choose
DM.DE
with + and - and push Enter . Use + and - to select the desiderate
value and push Enter to confirm. Time is setted in seconds, the value start from UNL (unlimited) to 999.
