5
After fixing the track, move rollers and check if there is any misalign-
ment or gap between the tracks.
Caution
7
Mounting of Open Area Track
Align the track end to the end of
the door pocket track.
Pull out the pocket trigger from
the door pocket track, and insert
it into the open area track.
Fasten the open area track and pocket trigger with provided screws in order of to
.
Move rollers if they cover the fastening holes on the track.
Overlap the two countersunk holes
on the pocket trigger and the two
holes on the open area track.
Deviation of the joint position makes
insertion of the trigger difficult.
The edge which has
three countersunk
holes is the end to be
connected.
When sliding the pocket trigger, use
a screwdriver.
The screwdriver may unexpectedly
come out and damage the track.
Scratches on the running track may
cause a noise of rollers during
operation.
When tightening the
screws
make sure that the both tracks
are aligned.
Be careful not to misalign the
tracks. Tighten the screws firmly.
Screw 3.5
×
25
Screw 3.5
×
25
Screw 4.0
×
30
Screw 4.0
×
30
Open area track
1
2
3
5
4
1
1
5
【1
Connecting to door pocket track.
【2】
Fastening trigger and track
Remove any dirt or aluminum
chips from the track.
Caution
Caution
Caution
Caution
Caution
OK
