6
How to remove door
187.5
187.5
30
30
30
30
Door width
−
361
Door width
−
361
This is where the doors meet.
2
×
I
4.5
④
Trigger
④
Trigger
⑧
Trigger
⑧
Trigger
⑦
Bumper block
2
×
I
4.5
2
×
I
4.5
2
×
I
4.5
Appendix
1
When Vertical Frame is not Used
Appendix
2
Positions of Trigger for In Line Sliding
Appendix
3
Pay attention not to let the door fall.
Process holes according to the drawing below.
Use a 10 mm support under the door.
Bumper block should be inserted together with
soft closers before installing upper track.
Use the track for standard sliding for this application.
❶
Plug in
❸
Pull out
❷
Push up
Insert the flat end of the spanner into
the lever part of the upper roller.
$ÀDW
blade screwdriver can be used as a
substitute. )
Caution
Min. 13
Min. 13
⑦
Bumper block
(Sold separately)
⑦
Bumper block
(Sold separately)
⑩
Door stopper
(floor mount)
(Sold separately)
⑩
Door stopper
(floor mount)
(Sold separately)
Leading edge
Trailing edge
When vertical frame is not used, use the
door stopper
⑩
and bumper block
⑦
on
WKHWUDFNDQGRQWKHÀRRU
Fasten the door stopper at the location
where the door will stop. Fix the bumper
block to both the upper track ends, then
adjust it to the position where the door
closes.
The soft closer may be damaged
if door stopper and bumper block
are not installed.
Caution
Caution
Caution
