3
3
9HUL¿FDWLRQ%HIRUH,QVWDOOLQJ6RIW&ORVHU
Soft closer
Upper track
Sticker
Cut end
Upper roller
Trailing edge
Leading
edge
1
2
Correct set position
Incorrect set position
Trigger catcher
(
Red colored part
)
Correct set position
OK
Trigger catcher
(
Red colored part
)
I
6
Pay attention to the
direction of the rollers
Upper track
:LWKRXWYHUL¿FDWLRQWKHVHOIFORVLQJIHDWXUHPD\IDLO
If the position is wrong, pull back the trigger catcher to
the correct position using a 6 mm diameter round bar.
Mounting of Upper Track
５
(Recommended screw: Countersunk head tapping screw 3.5
×
25
）
Be careful not to overtighten the screws and
screw heads protruding on upper track.
It may cause deformation of track or damage of
soft closer.
loose
inclined
overtightened
deeper groove
４
Inserting Parts into Upper Track
Insert the parts in order from
❶
to
❷
with care of direction.
Remove any dirt or aluminum
chips from the track.
F a s t e n b u m p e r b l o c k s
temporarily to prevent the
inserted parts from falling.
Caution
Caution
Caution
