background image

Instrument Guarantee

This Instrument is guaranteed to be free from defects in material and
workmanship for a period of one (1) year from the original purchase date. In
the event that a defect is found during the warranty time frame, LaMotte
Company agrees that it will be repaired or replaced without charge except for
the transportation costs. This guarantee does not cover batteries.
This product can not be returned without a return authorization number from
LaMotte Company. For warranty support or a Return Authorization Number,
contact LaMotte Company at 1-800-344-3100 or [email protected].

Limitations

This guarantee is void under the following circumstances:

• Damage due to operator negligence, misuse, accident or improper application.
• Damage or alterations from attempted repairs by an unauthorized
(non-LaMotte) service.
• Damage due to improper power source, AC adapter or battery.
• Damage caused by acts of God or natural disaster.
• Damage occurred while in transit with a shipping carrier.

LaMotte Company will service and repair out-of-warranty products at a
nominal charge.

Packaging And Delivery

Experienced packaging personnel at LaMotte Company assure adequate
protection against normal hazards encountered in transportation of shipments.
After the product leaves LaMotte Company, all responsibility for safe delivery
is assured by the transportation company. Damage claims must be filed
immediately with the transportation company to receive compensation for
damaged goods.

23

Summary of Contents for pHPLUS DIRECT

























Reviews: