Using the product
To dispense hot water:
Fully depress the left hand lever (fig 1.)
and then simultaneously turn the handle
forwards (fig 2.), the further forwards the
lever is turned the greater the flow.
At around 45° rotation is reached (fig 2.)
the maximum flow is achieved.
It is normal for the hot water to take a
moment to dispense as the water empties
from the product after each use, once the
handle is closed water will continue to run
until the spout has emptied.
Fig 1.
Fig 2.
⚠
Should you see that hot water persistently drips from the centre channel of the tap spout (when the tap is not in use
and the boilers indicator red light is switched on) then you should reduce the temperature adjustment dial on the top of
the boiler, see the boiler user manual for further detail.
Each time the product is used you should flush a small amount of boiled water through before use, typically this can be
used to preheat your cup, if unused for extended periods then flush the product a longer time.
⚠
WARNING: THIS APPLIANCE CAN BE USED BY CHILDREN AGED FROM 8 YEARS AND ABOVE
AND PERSONS WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES OR LACK OF
EXPERIENCE AND KNOWLEDGE ONLY IF THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION
CONCERNING USE OF THE APPLIANCE IN A SAFE WAY AND HAVE UNDERSTAND THE HAZARDS
INVOLVED. CHILDREN SHALL NOT PLAY WITH THE APPLIANCE. CLEANING AND USER
MAINTENANCE SHALL NOT BE MADE BY CHILDREN. ALL WIRING AND INSTALLATION MUST BE
SUPERVISED BY A SUITABLY QUALIFIED PERSON.
⚠
Do not add to, exchange or modify any component of the boiler or mixer tap, only genuine parts must be
used. The spout exit or any part of the system must not include any additional third party adaptors,
components or connections that will add resistance or modify the system.
⚠
The installation should be periodically checked for damage, if the property is left unattended for a
prolonged period we recommend isolating water supplies and switching off the boiler at the mains socket, on
reconnection flush thoroughly.
Please leave these instructions for your customer.
ref/tap6000v1
