Lamona LAM9500 Instructions And Installation Download Page 16

16

GB

6  Cleaning and care

•  Switch the hob off and let it cool down before you 

clean it.

•  Never clean the glass ceramic hob with a steam 

cleaner or similar appliance!

•  When cleaning make sure that you only wipe lightly 

over the ON/OFF key. The hob may otherwise be 

accidentally switched on!

•  DO NOT put the black grille into the dishwasher, it 

will affect the finish.

6.1  Glass ceramic hob

Important! 

Never use aggressive cleaning agents such 

as rough scouring agent, abrasive saucepan cleaners, 

rust and stain removers etc.

Cleaning after use

1.  Always clean the entire hob when it has become 

soiled. It is recommended that you do so every time 

the hob is used. Use a damp cloth and a little washing 

up liquid for cleaning. Then dry the hob with a clean 

dry cloth to ensure that there is no detergent left on 

the surface of the hob.

6.2  Grease filters

Cleaning the metal grease filters

Clean the metal grease filters in the dishwasher or in 

mild soapy water at least once a month or in the event of 

excessive grease deposits and/or intensive use.
To remove the filter, lift up the fan cover and lift the 

U-shaped stainless steel ventilation plate in the suction 

intake opening upwards to remove it from the fan. Now 

remove the filter. To do so, press the lock in the recessed 

handle downwards and remove the filter.
The filter can be rinsed in a dishwasher. Stand the filter 

upright in the dishwasher. Please use only rinse aid 

that is suitable for use with aluminium in order to avoid 

damaging and discolouring the filters.
Never rinse right next to glasses or light-coloured 

porcelain. 

Do not operate the fan without grease filters!

After rinsing the filter, dry it and replace it in the fan. 

Please make sure that the recessed handle is visible 

after you have replaced the filter. If possible, wipe the 

easily accessible inside of the fan with a cloth dampened 

with detergent every time you replace a filter, while at 

the same time paying attention to protruding parts in 

the inside of the fan.

Fan cleaning and care

The fan is best cleaned every time you clean the  grease 

filters and change the carbon filters.
Condensation water may collect under the filter after 

water has boiled rapidly with the lid of the pot removed. 

This is quite normal. The water should, however, be 

removed and the inside of the fan cleaned.
The ventilation openings in the cover ensure that 

residual moisture resulting from cooking and cleaning 

can escape if necessary when the fan is not in operation 

and the cover is on.
Please clean the filter and the inside of the fan if 

unpleasant remaining odours escape.
The fan is best cleaned with a soft damp cloth and mild 

soapy water.

Service

The filter must remain accessible. Replace the 

carbon filter depending on use every 5 to 24 months. 

Replacement filters are available, quote ref 

LAM2007

.

Cleaning & Care

Summary of Contents for LAM9500





























Reviews: