9
USE
BEFORE USING FOR THE FIRST
TIME
Before using the appliance for the first time
you should clean the interior and the exterior,
following the cleaning instructions given in
the section “Cleaning and Maintenance”.
Then heat the Warming Drawer for at least 2
hours. For this, turn the temperature control
to the maximum position (see section
‘Selecting temperature”).
Make sure the kitchen is well-ventilated when
you are doing this.
The appliance’s parts are protected by a
special product. For this reason, during the
first heating an odour will be released. Both
the odour and any smoke that may form will
disappear after a short time and neither
signifies that there is anything wrong with the
connection or the appliance.
CONTROL PANEL
The control panel has a Thermostat and
on/off switch. The control panel is only visible
when the drawer is open.
USING THE WARMING DRAWER
To use the Warming Drawer, proceed as
follows:
Put the crockery in the drawer.
Select the function you want by turning the
thermostat control to the desired position.
Switch on the appliance by pressing the
switch, which will light up.
Close the drawer.
Be careful not to use too much force when
closing the drawer since it may open up
again. Before taking out the warm crockery
you must switch off the Warming Drawer by
pressing the switch again.
SELECTING FUNCTION
By turning the thermostat control you can
select temperatures between 30 and 80 °C.
Do not force the thermostat control to the left
of the “0” position or to the right of the
maximum position since this may damage
the appliance.
As soon as the temperature selected is
reached, the heating is turned off. When the
temperature drops to a value below that
selected, the heating is turned back on.
The temperature scale is marked with
absolute temperatures in ºC and symbols
which correspond to the optimum
temperatures for groups of crockery:
Symbol
ºC
Function
30ºC
Defrosting
40ºC
Proving dough
Cups / glasses warming
60ºC
Crockery warming
Keep food warm
80ºC
Keep food Warm
