14
The electric connection is made via an
omnipolar switch, which is suitable for the
intensity to be tolerated and which has a
minimum gap of 3mm between its contacts,
which will ensure disconnection in case of
emergency or when cleaning the Warming
Drawer.
If a plug is used for the electric connection,
then it must be accessible after installation.
The connection should include correct
earthing, in compliance with current norms.
WARNING:
THE WARMING DRAWER MUST BE
EARTHED.
If the flexible supply cable fitted to the
Warming Drawer ever needs to be changed,
it should be replaced by an official After Sales
Service, because it requires special tools.
The manufacturer and retailers do not accept
responsibility for any damage that may be
caused to people, animals or property if these
installation instructions are not observed.