_ 07
User manual LAM4405
Before Using the oven
•
Do not place any materials
close to the product as
the sides may become hot
during use.
•
WARNING FIRE RISK
- Do not place aluminium
foil, baking trays or cook on
the base of this oven, doing
so will cause permanent
damage to your appliance
and cabinetry with the
potential risk of
fi
re.
•
Parts of the oven may
become hot during or
immediately after use.
Care should be taken to
avoid touching the heating
elements, and components
inside the oven which maybe
hot. Always allow oven to
cool.
•
If the door seal is very
dirty this can prevent the
door from closing properly
during use, resulting in
possible damage to adjacent
furniture and poor effi ciency.
Always ensure the door seal
is clean.
•
Product may become hot
when it is in use. Please be
careful not to touch these
hot surfaces.
•
Always use heat resistant
oven gloves when putting
dishes in or removing dishes
from the hot oven.
•
Do not use the product if
any door glass is removed or
damaged.
•
Always use heat resistant
oven gloves when putting
dishes in or removing dishes
from the hot oven.
•
Rear surface of the oven
may get hot when it is in
use. Make sure that the
electrical connections do
not contact the rear surface;
otherwise, connections may
be damaged.
•
Do not trap the mains cable
and do not route it over
hot surfaces. The cable
insulation may melt and
cause a short circuit.
•
Product must be installed
by a qualifi ed person
in accordance with the
regulations in force.
Otherwise, the guarantee
may become void.
•
When hot and cold air
meet, condensation can
form. The outer door is air
cooled and the inner glass
will become hot during
cooking, therefore some
condensation might form.
This is perfectly normal. All
condensation will disappear
as the oven reaches cooking
temperature.
•
Make sure that the product
control knobs are switched
off after every use.
