Exclusive to Howdens Joinery.co
Page _ 9
User manual LAM2603
Installing Your Extractor
This instruction must be strictly adhered to. Failure to comply could result in overheating and
serious damage to your appliance. It is recommended that the installation is carried out by two people.
Ensure the ceiling to whith this extractor it to be installed is strong enough to support the weight
of the extractor. Do not secure to plasterboard alone.
Before drilling or chiselling the ceiling or wall, check for pipes and power cables.
If ducting externally ensure the ducting tube is kept as short as possible and with the minimum of
EHQGVWRSHUPLWVPRRWKDLUÁRZ0D[LPXPOHQJWKPHWUHV'XFWHGDLUPXVWQRWEHGLVFKDUJHGLQWR
DÁXHZKLFKLVXVHGIRUH[KDXVWLQJIXPHVIURPDSSOLDQFHVVXSSOLHGZLWKHQHUJ\RWKHUWKDQHOHFWULFLW\
(E.g. gas boilers)
Ensure the requirements of the local authorities are adhered to concerning the discharge of exhaust
air.
Ensure adequate room ventilation is provided when the extractor is used in the same room as
appliances supplied with energy other than electricity.
1HYHUGXFWLQWRDKRWDLUÁRZVXFKDVDFHQWUDOKHDWLQJGXFW
:HVWURQJO\DGYLVHWKDWDOOH[WHULRURXWOHWVEHÀWWHGZLWKDQRQUHWXUQÁDSRUORXYUHGVODWWLQJ
Remove the frame assembly from the packaging and remove the 2 screws A to separate the upper part
from the lower part (Fig.2).
Fig.2
B
A
