www.howdens.com
Page _ 10
LAMONA
Appliances
Installing Your Extractor
Position the hole template on the ceiling paying attention that the arrow is positioned on the
same side as the appliance controls (Fig.3)
Drill 4, Ø8 holes in the ceiling and drive in 3 screws without completely tightening them. Pay
attention not to insert the screw into the hole marked with an X on the hole template
(the
À[LQJPXVWEHLQWRDVXLWDEOHVWUXFWXUHWKDWZLOOVXSSRUWWKHZHLJKWRIWKHH[WUDFWRU
VHFXULQJWRSODVWHUERDUGDORQHLVQRWVXIÀFLHQW
B
X
8
Fig.3
Take the upper part of the structure B and insert the 3 slots onto the 3 screws that are not
FRPSOHWHO\WLJKWHQHGURWDWLQJVOLJKWO\WRÀW)LJ
Drive in the fourth screw X and tighten the remaining 3 to fully secure the upper part of
structure B
Fig.4
B
