Touch the key on control panel for 2-3 seconds.
Cooking zone displays illuminate dimly.
The hob is ready for use now.
If no operation is performed within 10 seconds,
the hob will automatically return to Standby
mode
.
Residual Heat Indicators
CAUTION HOT SURFACE:
Although the heating elements do not get hot, the
hob surface will be heated by the pan and contents
and will get hot.
H
is displayed when the surface temperature of a
cooking zone is sensed to be above 60°C.
When residual heat falls below 60°C,
h
appears on
The display.
* If mains power is cut the residual heat indicators
will not be displayed.
09
Controls layout
Turning on the hob
NOTE: DO NOT PLACE HOT PANS ON CONTROL
PAD AREA
* Always keep the control panel clean and dry.
Damp or soiled surface may cause error codes
to be displayed or functions to be effected.
* If the control panel is exposed to intense
vapour or liquid this may also cause error codes
to be displayed or functions to be effected.
Using the hob
Do not use the ceramic hob if the glass surface is cracked, as electrical parts are directly beneath.
Switch off the appliance at the supply to prevent electric shock and contact your supplier.
The appliance is not intended to be operated by means of an external timer or separate control
system.
The hob surface remains hot after use. DO NOT TOUCH.
Cooking zone display
Cooking zone selection controls
Timer Selection
Timer Display
Power / Timer Set
Keylock
Main Key - On/0ff
User manual LAM1801
