16
Turn the hob underside down, place it on a
flat protected surface.
Apply the self adhesive seal to the
underside edges of the hob glass. For best
results, the seal should be adhered along
each side in turn, as close to the edge as
possible, and trimmed at each corner, taking
care to ensure a neat join.
DO NOT
fi t silicone sealant under the
glass hob instead of the self-adhesive seal.
Once the seal is on the glass the hob can be fitted
into the cut out:
Position rear side of the hob into the cutout,
lowering the front edge, gently pressing the hob
into position.
To remove hob:
Push hob up from below by placing hands at front
of hob
Or
Use fingers under the edge of the glass (never
use a screwdriver etc) to lift the hob
Self-adhesive seal
Fitting the hob
Protecting the hob cut-out
The types of chipboard used for work surfaces swell
relatively quickly in contact with humidity.
Apply a special varnish or adhesive to the cut edge
to protect and seal it from moisture ingress.
LAMONA
Appliances
