Page
5
www.howdens.com
INSTALLATION
MOUNTING THE APPLIANCE
Follow the supplied
separate mounting instructions when installing the appliance.
PRIOR TO CONNECTION
•
Check that the voltage on the rating plate corresponds to the voltage in your home.
•
Do not
remove the microwave inlet protection plates located on the side of the oven cavity wall.
They prevent grease & food particles from entering the microwave inlet channels.
•
Ensure the oven cavity is empty before mounting.
•
Ensure that the appliance is not damaged. Check that the oven door closes firmly against the door
support and that the internal door seal is not damaged. Empty the oven and clean the interior with
a soft, damp cloth.
•
Do not
operate this appliance if it has a damaged mains cord or plug, if it is not working properly,
or if it has been damaged or dropped. Do not immerse the mains cord or plug in water. Keep the
cord away from hot surfaces. Electrical shock, fire or other hazards may result.
•
Do not
use extension cord!
•
If the power supply cord is too short, have a qualified electrician or serviceman install an outlet
near the appliance.
AFTER CONNECTION
•
The oven can be operated only if the oven door is firmly closed
•
The earthing of this appliance is compulsory. The manufacturer will accept no responsibility
for injury to persons, animals or damage to objects arising from the non-observance of this
requirement.
The manufacturers are not liable for any problems caused by the user’s failure
to observe these instructions.
!
Summary of Contents for HJA7030
Page 1: ...User Manual Microwave combi oven HJA7030...
Page 2: ......
Page 18: ...Page 18 www howdens com NOTES...
Page 19: ...Page 19 www howdens com...