6
Figure 1
3.
Place the gas cylinder into the gas cylinder support, connect the regulator by screwing with the manifold
inlet fitting counterclockwise to tighten, turn the manifold inlet fitting clockwise to loosen or remove, see
Figure 2.
Figure 2
4.
Please use a flexible hose with a length less than 150cm.
5.
Please use a regulator complied with standard EN12864.
6.
Secure the cylinder by tightening clockwise the butterfly screw found on the gas cylinder support, so that
the cylinder cannot move from side to side or fall down, then close the door, see Figure 3.
lava rock
pilot box
