3
Warning
Only use the power cord included in the product and do not use with power sources other than the displayed.
Do not place heavy object on top of power cord, connect nearby a heating device, or connect multiple power cables to
an outlet.
Do not process power cord or use as damaged.
Accurately insert to the tip of electrode part.
Hold the plug when inserting power plug. Excessive bending, twisting or pulling of the cord can damage the cable
interior and cause electric shock, fire or failure.
※ If power cord is damaged, contact our company or the seller.
Regularly remove power plug from the outlet to clean the electrode root and gap. Do not insert power plug with dusts
and alien substances attached.
Do not install this product in places with high temperature and humidity or poor ventilation, places with combustible
and explosive gases or toxic gases, places with large volume of dusts, and on top of flammable objects. Also, install at
least 50cm away from the wall when installing this product nearby a wall.
Do not approach the product near a firearm or high temperature. Do not insert metals, flammables, and liquids into the
machine.
Do not disassemble or remodel the machine.
Do not use in abnormal status such as smoke or abnormal odor and sound. When such status occurs, immediately turn
off the power switch. Remove power plug from the outlet and contact the seller or our company. Never repair the
product on your own as it is dangerous.
Caution
Power plug must be removed from the outlet when not used for long time.
Do not insert power plug using wet hands.
Earth connection must be done before connecting power plug to power. Also, remove power plug before disconnecting
earth.
Especially, keep away from children.
Do not mount on the product or place heavy object on top.
Do not place this product in an unstable place (on top of vibration or slanted surface and places where vibration of other
machines can be easily delivered). There is a concern for injury of a nearby person from falling or tripping.
Do not place the product in front of wind from air conditioner.
Do not block the vent hole. If the vent hole is blocked, there are concerns for failure or fire from accumulation of heat
inside.
During operation of the machine or insertion of laminate, be careful about hair, necktie and necklace from rolling in.
When film glue is attached to the laminate roller, squeeze a cloth soaked in neutral detergent and wipe the roller. (※ Do
not clean the roller using benzene, thinner and sponge.
The rollers must be lifted up when laminate processing is not being performed.
Cover with a cloth when the machine is not used to avoid places with direct light or fluorescent light. Light can rapidly
degenerate rubber of the laminate roller.
Turn the power switch off and remove power plug from the outlet for safety during transportation of this product.
Summary of Contents for AUTO ATLAS-14T
Page 1: ......
