15
Maintenance
This product is composed of various rollers, and they must be cleaned with use.
Laminate can be maintained as desirable by cleaning the rollers.
Cleaning of roller
Small amount of glue can leak out of the film section and attach to the roller during laminate
processing. If glue remains on the rollers, it can degenerate quality of laminate process or cause
failure. The rollers must be regularly cleaned.
①
Remove the direction board and open the top unit to clean.
②
Wipe out with soft cloth or wipe glue and contamination out using antiseptic ethanol
or alcohol. Do not use solvent thinner and benzene as they can deform or discolor the
rollers.
③
Bottom heat rollers will not rotate for safety when [START/STOP] button is pushed with
the top unit open. Close the top unit and slowly rotate the rollers for cleaning.
Other rollers
Other rollers are cleaned as identical to heat rollers as paper scraps and dusts can attach to
rollers. Feed roller on the back of the direction board must be cleaned as well.
Cover with a cloth after use.
After using this product, cover the main body with a large cloth with sufficient size to avoid
dusts.
Stop the rollers when cleaning.
Do not clean the rollers using hard objects like steel wool as they can damage
rollers.
Do not inflict force on rollers for long time.
Do not clean rollers using thick paper, which is occasionally found in pack type
laminators. Thick paper can block the device and cause damage or failure. Likewise,
do not use thin paper to clean rollers. Paper can roll into rollers, causing failure.
Caution
Summary of Contents for AUTO ATLAS-14T
Page 1: ......