Lambretta V125 Special 2018, User Manual

Page: 17 / 53

13
Instrument and control functions
8. Turn signal indicator left
This indicator light flashes when the
turn signal light is activated.
9. Turn signal indicator right
This indicator light flashes when the
turn signal light is activated.
10. Fuel warning indicator
The fuel warning indicator lights up if
little fuel is left in the tank. Refuel imme -
diately.
CAUTION
Take care that the fuel tank does not get
completely drained. This will cause the
engine to stall which can result in loss
of control or an accident.
11. Oil check indicator
This indicator lights up every 1000km
to remind the user to check the oil level
and if needed fill it up.
Reset the indicator: When in ODO mode,
press the SET button for 5 seconds and
the indicator will reset.
12. Clock
The clock shows the current time.
Set the time: When in ODO mode hold
the SET button for 2 seconds to enter
the clock setting. The digit to set will
blink. Shortly press the SET button to go
up one by one. When ready with setting
push the button for 2 seconds to go to
the next digit. When finished setting the
clock press the button for 2 seconds.
Also the tiime will be saved if there is no
interaction for more than 30 seconds.
Handlebar switches - Left
1
2
3
1. High / Low beam switch /
2. Turn signal switch
3. Horn button
1. High / Low beam switch /
Set this switch to for the high beam
and to for the low beam.
2. Turn signal switch
To indicate a right-hand turn, push the
button and slide the whole switch right.
To indicate a left-hand turn, push the
button and slide the whole switch left.
To deactivate the turn signal, push the
button and slide the switch back to the
middle.