3
(15190) PreLOG
Operating Instructions
Operating Instructions
Data Logger PreLOG (15190)
1
Scope of Delivery
PreLOG or PreLOG ECO
•
Connecting cable with circular MiniUSB connector
•
Connecting cable precipitation sensor (2-pole)
•
USB to MiniUSB cable
•
Cable connector
•
Operating instructions
•
Software PreLOG-Commander (country-depending on CD or as download)
•
Software MeteoWare Rain (country-depending on CD or as download)
•
Check the delivery for transport damages and document them extensively for following claims for damages against
the shipper. Afterwards contact the LAMBRECHT service department under
+49-(0)551-4958-390.
2 Order
Codes
PreLOG Id-No.
00.15190.000000
PreLOG ECO
Id-No. 00.15190.010000
3
Safety Instructions and Warranty
This system is designed according to the state-of-the-art accepted safety regulations. However, please note the
following rules:
Before setting into operation please read all respective manuals!
1.
Please take notice of internal and state-speci
fi
c guidelines and/or rules for the prevention of accidents (e. g.
2.
the professional association). If necessary ask your responsible safety representative.
Use the system according to the manual’s regulations only.
3.
Always have the manual at hand at the installation site.
4.
Use the system in technically correct conditions only! You have to eliminate in
fl
uences immediately, which
5.
might impair security .
Prevent the ingress of unwanted liquids into the devices.
6.
Please note the loss of warranty and non-liability by unauthorised manipulation of the system. You need
a written permission from the LAMBRECHT meteo GmbH for changes of system components. These
activities must be operated by a quali
fi
ed technician.
The warranty does not cover:
Mechanical damages caused by external impacts (e. g. icefall, rockfall, vandalism).
1.
Impacts or damages caused by over-voltages or electromagnetic
fi
elds which are beyond the standards and
2.
speci
fi
cations in the technical data.
Damages caused by improper handling, e. g. by wrong tools, incorrect installation, incorrect electrical
3.
installation (incorrect polarity) etc.
Damages which are caused by using the device beyond the speci
fi
ed operation conditions.
4.
