Lambrecht power[cube] 30.95800.015000, Manual

Page: 5 / 10

________________________________________________________________________________________________
________________________________________________________________________________________________
5
Integration in an existing network with an own DHCP server via Wi-Fi
Following the previous chapter the network in the following configuration example has the Wi-Fi name „FB-
LM“ and the address area 192.168.100.1 - 192.168.100.254. The password of the network is „1234567890“.
These data have to be replaced with the data of the existing network in which the power[cube]-Wi-Fi is
integrated.
Needed information:
MAC address Wi-Fi module
Destination WiFi name:
password destination WiFi:
Free IP address (fix) in destination Wi-
Fi for Wi-Fi module
Subnet mask of destination network
(e.g. 255.255.255.0)
Security mode of destination network
(z.B. WPA2PSK)
Encryption type of destination network
(e.g. AES)
1.) Connect with Wi-Fi „met[LOG]-Wi-Fi“; Password: „met[LOG]“ (See example in previous chapter)
2.) The USR-WIFI232-630 Wi-Fi module in power[cube] is reachable under the IP address 10.10.100.254 via
a browser.
3.) Log in at the website of the Wi-Fi module as user „admin“ with the password „admin“.
4.) Open the page „Quick Configure“ via the correspondent link.
5.) Change the Wi-Fi mode in „STA Mode“ (Station Mode). According the choice further fields will be shown.